DURKOPP ADLER M-Type Delta D867 - Page 92

Programming Commander DELTA
90 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Setting options Needle thread tension
Menu item Setting 1 Setting 2
linear Needle thread
tension
Value range 00 – 99
Maximum needle thread
tension reached at the
upper speed limit.
Min.
sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Speed at which the
increase in needle thread
tension should start.
Max.
sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Speed up to which the
increase in needle thread
tension should occur.
2. Value
On/Off
Min.
sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Speed from which the
2
nd
needle thread tension
should be used.
2. Value On Min.
sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Speed from which the
2
nd
needle thread tension
should be used.