EasyManua.ls Logo

Dynapac CC900 e - Maintenance, 10 H; Hydraulic Reservoir, Level Check - Filling

Dynapac CC900 e
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance, 10h
4812164901_A.pdf2022-11-14
Maintenance, 10h
Every 10 hours of operation (Daily)
Park the roller on a level surface.
The battery must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Park the roller on a level surface.
The battery must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensure that the hood is fully open when work is
being carried out under it
Ensure that the hood is fully open when work is
being carried out under it
Hydraulic reservoir, Level check - Filling
Wipe the sight glass (1) clean. Make sure that the oil
level is in the middle of the sight glass. If necessary,
remove the hydraulic tank cap (2) and fill up with new
hydraulic oil.
Fig. Hydraulic oil tank
1. Sight glass
2. Hydraulic oil tank cap
1
2
See under the heading ‘Lubricants’ for the correct fluid
grade.
93

Table of Contents

Related product manuals