EasyManua.ls Logo

Dynapac CC900 e - Interlock; Operator position

Dynapac CC900 e
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine description
4812164901_A.pdf2022-11-14
Battery charger, 1-phase (100–240V)
The charger may become hot during charging. Use hand protection to safely
handle the charger when charging.
The charger may become hot during charging. Use hand protection to safely
handle the charger when charging.
To maintain safe operations, the unit automatically reduces its output power
if the temperature rises above set thresholds, or if the AC input voltage is
too low.
To maintain safe operations, the unit automatically reduces its output power
if the temperature rises above set thresholds, or if the AC input voltage is
too low.
If power is interrupted, and then returns, the charger restarts and continues
to operate without hazard to the user, or damage to the batteries.
If power is interrupted, and then returns, the charger restarts and continues
to operate without hazard to the user, or damage to the batteries.
Unplug the charger from both AC and DC sources when cleaning, moving, or
conducting any maintenance or repair on the charger. No user serviceable
parts are inside. Do not remove the cover due to the risk of electrical shock.
Unplug the charger from both AC and DC sources when cleaning, moving, or
conducting any maintenance or repair on the charger. No user serviceable
parts are inside. Do not remove the cover due to the risk of electrical shock.
Do not expose the charger to oil, dirt, mud, or direct heavy water spray when
cleaning the vehicle or machine.
Do not expose the charger to oil, dirt, mud, or direct heavy water spray when
cleaning the vehicle or machine.
All connectors between the battery charger and the battery should be
regularly inspected for corrosion and contamination as these can cause
overheating and can be a fire hazard.
All connectors between the battery charger and the battery should be
regularly inspected for corrosion and contamination as these can cause
overheating and can be a fire hazard.
Do not operate the charger in a closed-in area or restrict ventilation.
Do not operate the charger in a closed-in area or restrict ventilation.
Never charge a frozen or non-rechargeable battery.
Never charge a frozen or non-rechargeable battery.
53

Table of Contents

Related product manuals