Operation
4812164901_A.pdf2022-11-14
Incorrect disconnection during charging
(1-phase charger).
If the charger socket on the machine side is
disconnected from the machine whilest charging is in
progress the machine/battery system will still have the
"anti-drive-away" function active and the machine will
not be driveable.
Also the machine display will have an appearance
which indicates that the charger is still connected to
the machine.
Fig. Instrument panel
1. Battery ON/OFF
1
To escape this situation/status you need to re-start the
battery by turning off and then activate it again by
using the battery ON/OFF switch (1) on instrument
panel.
59
To Next Page
Loading...
