Dynapac CC900 e - Introduction; The Machine; Intended Use; Training

Introduction
4812164901_A.pdf2022-11-14
Introduction
The machine
Dynapac CC900 e/1000 e are electric vibratory
tandem rollers in the 1.6 tonne class with 900/1000
mm wide drums. They feature power drive, brakes,
and vibration on both drums.
Intended use
CC900 e/1000 e are primarily used for small
compaction work such as minor roads, sidewalks,
cycle ways and small parking places. As they have no
exhaust emissions, they are also particularly suitable
for use in more enclosed spaces such as parking
garages.
Training
The purpose of operator training is to impart the
operator the knowledge and skills necessary for
proper operation and routine maintenance of the roller
according to this manual.
Note to trainer: Further information on operator training can be
found in ISO 7130.
Signal symbols and meaning
WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in death or serious injury.
WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in death or serious injury.
CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
the machine or property.
CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
the machine or property.
Safety information
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.
We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.
1