Operation
4812164901_A.pdf 2022-11-14
Battery charging, battery charger, 3-phase
(400V) (Accessory)
Charging procedure
Make sure the charger is in the OFF position.
OFF
1
Fig. Frame left side
1. Charging socket
Connect the charger’s charging cable to the charging
socket on the machine (1).
Connect the charger's 3-phase plug to the wall socket.
Fig. Control panel
1. Battery ON/OFF
1
Start the battery using the battery switch (1) on the
panel, press and hold the switch down for ~2 seconds.
60
To Next Page
Loading...
