Maintenance - 50h
4812164901_A.pdf2022-11-14
Maintenance - 50h
Every 50 hours of operation (Weekly)
Park the roller on a level surface.
The battery must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Park the roller on a level surface.
The battery must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensure that the hood is fully open when work is
being carried out under it
Ensure that the hood is fully open when work is
being carried out under it
After the first 50 working hours, replace the
hydraulic oil filter.
After the first 50 working hours, replace the
hydraulic oil filter.
Rubber elements and fastening screws - Check
Fig. Drum suspension
1. Rubber element
2. Fastening screws
1
2
Check all the rubber elements (1), and replace all the
elements if more than 20% of them on one side of the
drum are cracked deeper than 10-15 mm.
Use a the blade of a knife or pointed object to check.
Check also that the screw fasteners (2) are tightened.
The screws on the rubber elements are sealed
with Loctite. Check the rubber elements on both
sides of the roller.
The screws on the rubber elements are sealed
with Loctite. Check the rubber elements on both
sides of the roller.
97
To Next Page
Loading...
