Dynapac CC900 e - General; Hydraulic System

Technical specifications
4812164901_A.pdf2022-11-14
Vibration frequency 60 Hz 3,600 rpmVibration frequency 60 Hz 3,600 rpm
Centrifugal force 13.6 kN 3,060 lbCentrifugal force 13.6 kN 3,060 lb
Note: The amplitude is measured as the real value
and not the nominal.
PropulsionPropulsion
Speed range 0-9 kph 0-5.5 mphSpeed range 0-9 kph 0-5.5 mph
Climbing capacity (theoretical) 40 %Climbing capacity (theoretical) 40 %
Tilting ±13 ºTilting ±13 º
General
Electric motor Drivning/Styrning VibrationElectric motor Drivning/Styrning Vibration
Type Permanent magnet Permanent magnetType Permanent magnet Permanent magnet
PowerPower
- kW 10 8.5- kW 10 8.5
- HP 13.4 11.4- HP 13.4 11.4
Engine speed 2700 2550Engine speed 2700 2550
Electrical systemElectrical system
Battery type Lithium-ionBattery type Lithium-ion
Battery voltage 48VBattery voltage 48V
Battery capacity 14.6 kWhBattery capacity 14.6 kWh
Charging time 20%-80% 1-phase 230V approx. 6 hoursCharging time 20%-80% 1-phase 230V approx. 6 hours
Charging time 20%-80% 3-phase 400V approx. 1.3 hoursCharging time 20%-80% 3-phase 400V approx. 1.3 hours
Fuses See the Electrical system section - fusesFuses See the Electrical system section - fuses
Hydraulic system
Opening pressure MPa PsiOpening pressure MPa Psi
Drive system 35 5,076Drive system 35 5,076
Supply system 2.0 290Supply system 2.0 290
Vibration system 20.7 3,002Vibration system 20.7 3,002
Control systems 9.5 1,378Control systems 9.5 1,378
Brake disengagement 1.7-3.0 247-435Brake disengagement 1.7-3.0 247-435
15