EasyManua.ls Logo

Dynapac CC900 e - Vibration System; Rops

Dynapac CC900 e
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine description
4812164901_A.pdf 2022-11-14
articulation.
The steering angle is proportional to the deflection of
the steering wheel.
Vibration system
The vibration system is a hydrostatic system where a
hydraulic motor drives the eccentric shaft which
generates the vibrations of the roller drum.
An eccentric shaft in the front and rear drum generates
the vibrations of the roller drum.
Each eccentric shaft is driven by a hydraulic motor. An
electric hydraulic pump supplies the hydraulic motors
with oil.
ROPS
ROPS is the abbreviation for "Roll Over Protective
Structure" (ISO 3471).
If any part of the ROPS structure's protective
construction displays plastic deformation or cracks, the
ROPS structure must be replaced immediately.
Never perform unauthorized modifications on the
ROPS structure without first having discussed the
modification with Dynapac's production unit. Dynapac
determines whether the modification could result in the
approval according to the ROPS standards becoming
invalid.
20

Table of Contents

Related product manuals