Machine description
4812164901_A.pdf2022-11-14
Safety instructions for installation
Safety instructions for lifting
Obey the lifting instructions to prevent
dropping the battery system. See chapter Lifting
instructions.
Obey the lifting instructions to prevent
dropping the battery system. See chapter Lifting
instructions.
Make sure that the installation area is clear
before placing the battery system into machine.
Make sure that the installation area is clear
before placing the battery system into machine.
Falling object hazard - Do not stand under the
hoisted battery system.
Falling object hazard - Do not stand under the
hoisted battery system.
Crushing hazard - Do not place any body part
between installed battery system and machine
frame when lowering the battery system.
Crushing hazard - Do not place any body part
between installed battery system and machine
frame when lowering the battery system.
Safety instructions for connecting cables
The battery pack must be fully mechanically
installed before connecting cables. In order to
prevent external short circuit, connect the
power terminals and signal interface
terminal last.
The battery pack must be fully mechanically
installed before connecting cables. In order to
prevent external short circuit, connect the
power terminals and signal interface
terminal last.
In order to prevent external short circuit, make
sure that external cabling between battery
system and machine frame is not cut or
damaged during installation.
In order to prevent external short circuit, make
sure that external cabling between battery
system and machine frame is not cut or
damaged during installation.
Safety instructions for operation
Safety instructions for charging
Do not connect or disconnect power terminals
or signal interface terminal under the load.
Do not connect or disconnect power terminals
or signal interface terminal under the load.
43
To Next Page
Loading...
