Dynapac CC900 e - Starting

Machine description
4812164901_A.pdf2022-11-14
•
Disconnect the mains supply before connecting or disconnecting the links to
the battery.
•
Disconnect the mains supply before connecting or disconnecting the links to
the battery.
•
Do not disconnect the battery plug during the charging process. Eventually
generated arching can ignite the charging gases that build up during the
charging process, causing fire or an explosion.
•
Do not disconnect the battery plug during the charging process. Eventually
generated arching can ignite the charging gases that build up during the
charging process, causing fire or an explosion.
•
Ensure that no flammable materials are stored in the area surrounding the
charger
•
Ensure that no flammable materials are stored in the area surrounding the
charger
•
People may become entangled in or trip over loose, unwound cables. When
unused, wind up the charging leads, or if available, place them on the cable
holder so that no one can trip over or become entangled in them.
•
People may become entangled in or trip over loose, unwound cables. When
unused, wind up the charging leads, or if available, place them on the cable
holder so that no one can trip over or become entangled in them.
•
Ensure all ventilation ports are not obstructed
•
Ensure all ventilation ports are not obstructed
•
Only operate the charger in accordance with the degree of protection shown
on the rating plate.
•
Only operate the charger in accordance with the degree of protection shown
on the rating plate.
•
The manufacturer recommends a periodic safety inspection of the device. A
safety inspection should be carried out by a qualified electrician. For safety
inspections follow the appropriate national and international standards and
directives.
•
The manufacturer recommends a periodic safety inspection of the device. A
safety inspection should be carried out by a qualified electrician. For safety
inspections follow the appropriate national and international standards and
directives.
•
If the battery charger does not work correctly or if it has been damaged,
unplugged it immediately from the supply socket and from the battery socket
and contact a retailer.
•
If the battery charger does not work correctly or if it has been damaged,
unplugged it immediately from the supply socket and from the battery socket
and contact a retailer.
•
Do not try to service the battery charger yourself. Opening the cover may
expose you to shocks or other hazards.
•
Do not try to service the battery charger yourself. Opening the cover may
expose you to shocks or other hazards.
55