B 3
B_F6C_GB.fm 3-22 0504
2.1 Vehicle
Construction
The paver finisher has a welded steel frame on which the individual components are
mounted.
The caterpillar drives compensate uneven areas on the ground; the suspension of the
attached screed additionally helps to attain a high paving precision. The continuously
adjustable hydrostatic traction drive allows the speed of the paver finisher to be
matched to all work conditions.
Operation of the paver finisher is facilitated by the automatic material handling sys-
tem, the separate traction drive and the clearly positioned operating and control ele-
ments.
The following extra equipment (
&
) is available:
- Automatic levelling/slope control system
- Additional cut-off shoe
- Larger working widths
- Protective roof
- Telescoping seat console
- Additional lighting
- Hydraulic extendable push roller cross bar
Further equipment and upgrade options on request.
Engine: The paver finisher is equipped with a air-cooled 4-cylinder Deutz diesel en-
gine. For further information please refer to the operating instructions for the engine.
Caterpillar drive: Both caterpillar drives are directly driven by separate drives with-
out any drive chains that would require maintenance and servicing.
The tension of the caterpillar chains can be readjusted using tensioners.
The tension of the drive chains can be mechanically adjusted.
Hydraulic system: The diesel engine drives the hydraulic pumps for all main drives
of the paver finisher via the attached distribution gear and its auxiliary drive shafts.
To Next Page
Loading...
