Dynapac F6C - Loading by Crane

C 6
C_F6C_GB.fm 6-8 0504
4 Loading by crane
$
Use only lifting gear that can bear the load.
(For the weights and dimensions, see chapter B, sections 4.1 and 4.2)

Four lifting eyes (13, 14) are provided for loading the vehicle with a crane.
- Park the paver finisher and render it
safe.
- Engage the transport safeguards.
- Reduce the paver finisher and the
screed to their basic widths.
- Take off all protruding or loose parts
and the gas bottles for the screed
heating system.
- Attach the lifting gear to the four lifting
eyes (13, 14).
$
Make sure that the paver finisher re-
mains in a horizontal position during lift-
ing!
DF65C.wmf,F6Cside.cdr/F6CFront2.cdr
13
14