D 27
D F6C.GB 27-50 0504
Vibration (76) and tamper (screed-
specific) (77) speed control
The speed controllers for the screed
tamper and vibration are located at the
rear of the paver finisher. Used to contin-
uously set the desired speed (frequen-
cy) of the screed movement.
- The speed controller for vibration (76)
is located on the railing on the right
side of the machine (support of the
separating agent system).
- The speed controller for the tamper
(77) is located on the railing on the left
side of the machine (gas bottle hold-
er).
For the vibration and tamper frequency,
see „Technical data“ in the Bohlen-Be-
triebsanleitung.
Vibrpm.jpg/Tamprpm.jpg
76
77
To Next Page
Loading...
