D 42
D F6C.GB 42-50 0504
3.6 Paving with screed stop
General
The screed hydraulics can be influenced to achieve optimum paving results:
Deactivation of floating position
The „floating position deactivation“ function can be used to block the screed hydrau-
lics to prevent the screed from lowering when the paver finisher stops during paving.
Switch (1) has the following positions:
A: Automatic screed stop when the
drive
lever is in the centre position
C: Switched off
Use position (C) for setting up the paver
finisher and position (A) for paving.
6.EPS
1
A
C
To Next Page
Loading...
