Need help?Do you have a question about the Dynatest FWD and is the answer not in the manual?
General| Brand | Dynatest |
|---|---|
| Model | FWD |
| Category | Test Equipment |
| Language | English |
General advice for safety.
Basic safety guidelines for operating the FWD/HWD.
Components of the Dynatest FWD/HWD Test System.
Concise instructions for preparing a towing vehicle.
Powering the FWD/HWD test system via 12VDC.
Minimum and recommended specifications for the computer.
Configuring TCP/IP settings for PC communication.
Introduction to the DDC software interface and initial setup.
Steps for configuring FWD/HWD hardware components.
Manual checks and operations of the FWD/HWD hardware.
Procedures for adjusting drop height stops and parameters.
Procedure for changing the FWD drop weight assembly.
Connecting load cell, deflectors, and other sensors to the Compact15.
Performing a functional check of the entire system.
Final checks before driving to the test site.
Step-by-step procedure for powering on the system.
Overview of the main data collection screen interface.
Step-by-step process for executing a test sequence.
Description of the hydraulic system components and operation.
Key features and description of the FWD load cell.
Description and specifications of the seismic detector.
Procedure for ensuring deflector accuracy and consistency.
Details for setting up the GPS system.
Details and setup for camera integration.
Overview of the Compact15 controller's main features.
Operating the Compact15 system manually using push buttons.
Maintenance procedures for the wheels and brake system.
Maintenance procedures for the hydraulic system.
Overall functional checks of the hydraulic system.
Testing the functionality of proximity switch sensors.
List and description of optional hardware accessories.
Description of the native MS Access data format.
Format for pavement deflection data exchange (DDX).
Error when deflection exceeds specified range.
Error indicating failure in computer-trailer communication.
To Next Page