3.6 Cameras
The software package includes two applets for camera support:
Camera General support for Windows compatible DirectX cameras
HCamera Halcon (MvTec) based camera support (hardware triggered)
3.6.1 Camera Applet
Go to the manufacturer’s software support site and look for “DirectX Drivers” or a
proprietary “Capture” program. Follow installation instructions and check that the capture
program can connect to the camera and show images. Shut down the capture program and
check that the camera appears in the Camera Applet’s “Pick Camera” list.
3.6.2 HCamera Applet
This applet is used with the Dynatest MFV (Multi Function Vehicle) and all preparations are
performed by Dynatest prior to delivery.
To Next Page
Loading...