2017.06.19 FwdMan2.8.17.docx 3-19
3. Computer Configuration
The computer must be considered an integral part of the data collection equipment. It should
not be used for any other purposes. Therefore we recommend that Dynatest supply and
configure the computer for the equipment. If the customer supplies the computer, then it must
be open for modifications to Computer Name, Workgroup/Domain membership, Security
Setup, User accounts, Network Setup, Power Options and Virus Protection.
Configuring the computer consists of
Verifying that requirements are fulfilled
Installing the program packages
Establishing a network connection between the PC and the Compact 15
Running the program to setup initial parameters
Dynatest personnel normally handle this task. However, this information is supplied in the
event that the end-user may need to reconfigure or replace the PC.
3.1 Requirements
The minimum requirements listed here are mandatory. Although the system will work with
the minimum requirements, the recommended specifications are strongly advised especially
for those systems with camera support.
To Next Page
Loading...