1.3.2 The Compact15 System Controller
The Dynatest Compact15 System Controller is a PC based control and signal processing unit,
which is networked with the host computer (Ethernet).
A temperature controlled case, compact and light.
Controls FWD/HWD operation.
Performs scanning, conditioning and further processing of the transducer signals (1 load +
up to 15 deflections).
Monitors status of the FWD/HWD unit to ensure correct measurements.
12VDC powered.
1.3.3 The Remote Control Box
The Remote Control Box (placed in the towing vehicle) interfaces the Park Alarm signal and
switches on and off the System electronics and (optional) warning lights.
1.3.4 The Computer
The Computer is used for input of control and site/test identification data as well as for
displaying, storing (on disc), editing, sorting and further processing of FWD/HWD test data.
Ethernet RJ45 connector (10/100 Mbit)
1.3.5 FwdWin, a Windows based FWD/HWD Field Program
Features
User Interface
Flexible layout through floating, resizable windows
Voice feedback (error- and warning-messages)
Support for multiple languages
Data Files
Test data is stored in databases for ease of processing.
Earlier Dynatest ASCII file formats still supported.
Pavement Deflection Data eXchange (PDDX by AASHTO)
Section Database
The operator can retrieve Roadway network information in the field:
Facility Names and Codes
Sectioning
Structural information
Quality Assessment
Changes to primary program- and equipment-parameters are logged.
To Next Page
Loading...