2017.06.19 FwdMan2.8.17.docx 4-27
AUUutostart
Check UUAUUutostart to make DDC start FwdWin and applets as soon as communication with the
attached hardware is established.
Auto-EXIT
Check Auto-EXIT to close the opening window when the main program is terminated.
Last COM Port
Some Serial COM port drivers (Blue Tooth) can be extremely slow to determine if hardware
is available or not. To avoid initial delays you may reduce this number.
PUUasswords
Check this to require that DDC Administrators enter a password.
Applets Only
Use this if a secondary computer needs to show some of the applets.
4.1.6 Entering the Main Program
Once everything in the introductory screen is configured, you may click the “SUUtUUart” button
(make sure “Administrator” is selected). The data collection screen should now appear. The
Administrator can now complete the setup process.
To Next Page
Loading...