Eaton EDR 3000 - Page 120

EDR-3000 IM02602003E
Name Description Assignment via
RO4.3 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
RO4.4 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
RO4.5 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
RO4.6 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
RO4.7 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
Ack signal RO 4 Module Input State: Acknowledgment signal for the Relay Output. If
latching is set to active, the Relay Output can only be
acknowledged if those signals that initiated the setting are fallen
back and the hold time is expired.
[Device Para
/Relay Outputs
/RO-5 X2
/RO 4]
RO5.1 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 5]
RO5.2 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 5]
RO5.3 Module Input State: Assignment [Device Para
/Relay Outputs
/RO-5 X2
/RO 5]
www.eaton.com 108