EDR-3000 IM02602003E
Parameters
Parameter setting and planning can be done:
Directly at the device; or
By way of the PowerPort-E software application.
Parameter Definitions
Device Parameters
Device Parameters
are part of the “Device Parameter tree”. By modifying the Device Parameters, the User may
(depending on the type of device):
Configure digital inputs, Assign LEDs;
Configure Relay Outputs;
Assign acknowledgment signals;
Configure statistics;
Configure general Protocol Settings;
Adapt HMI settings;
Configure recorders (reports);
Set date and time;
Change passwords; and/or
Check the version (build) of the device.
www.eaton.com 290
To Next Page
Loading...
