EDR-3000 IM02602003E
Fault Recorder
Fault rec
Purpose of the Fault recorder
The Fault Recorder provides compressed information about faults (e.g. Trip Causes). The compressed information can
be read out also at the HMI. This might be helpful for fast fault analysis already at the HMI. After a fault, a popup
window will be sent onto the display in order to draw the users attention to the fault. The Fault Recorder will provide
information on the causes of the fault. A detailed fault analysis (in oscillographic form) can be done means of the
Waveform Recorder. The reference between the Fault Records and the corresponding Waveform (Disturbance)
Records are the »
Fault Number«
and the »
Grid Fault Number«
.
www.eaton.com 222
To Next Page
Loading...
