Eaton EDR 3000 User Manual

EDR-3000 IM02602003E
Measuring Values
Read Out Measured Values
In the »Operation/Measured Values« menu, both measured and calculated values can be viewed. The measured
values are ordered by »Standard values« and »Special values« (depending on the type of device).
Read Out of Measured Values Via PowerPort-E
•If PowerPort-E is not running, please start the application.
•If the device data have not been loaded, select »Receive Data From The Device« from the »Device« menu.
•Double click on the »Operation« icon in the navigation tree.
•Double click on the »Measured Values« icon within the »Operation« navigation tree.
•Double click the »Standard Values« or »Special values« within the »Measured values« tree.
•The measured and calculated values are now shown in tabular form in the window.
To have the measuring data read in a cyclic manner, select »Auto refresh« in
the »View« menu. The measured values are read out about every two
seconds.
Measurement Display
Menu [Operation\General Settings] offers options to change the display of measured values within the HMI and Power-
Port-E.
Scaling of Measured values
By means of the parameter »Scaling« the user can determine how measured values are to be displayed within the HMI
and PowerPort-E :
Per Unit quantities
Primary quantities
Secondary quantities
Power Units (applies only for devices with power measurement)
By means of the parameter » Power Units« the User can determine how measured values are to be displayed within the
www.eaton.com 171

Eaton EDR 3000 Specifications

General

Brand	Eaton
Model	EDR 3000
Category	Relays
Language	English