EDR-3000 IM02602003E
What Is Included with the Device
The device package includes all connection terminals, except communication connectors, but does not include the
fastening material. Please check the package for completeness upon delivery.
Device Package Contents:
1 – Protective Relay;
1 – Mount (Standard or Projection);
1 – Quick Start Guide; and
2 – CDs
Disk 1 - Contains the User's Manual, Modbus Register Maps, IEC 61850 Communication
Documentation, Wiring Diagrams, and Device Model (Template) for Off-line Parameter Setting;
Disk 2 - Contains PowerPort-E and Quality Manager software applications.
Disk1 contains the device templates. The device templates MUST BE installed
to allow PowerPort-E to configure a device off-line.
Please make sure the product label, wiring diagram, type code, and materials and description pertain to this device. If
you have any doubts, please contact Eaton Corporation's Customer Service Department.
Storage
The devices must not be stored outdoors. If stored, it must be stored in an area with temperature and humidity control
(see the Technical Data section contained in this manual).
Important Information
In line with the customer’s requirement, the devices are combined in a modular
way (in compliance with the order code). The terminal assignment of the
device can be found on the top of the device (wiring diagram). In addition, it
can be found within the Appendix of this manual (see Wiring Diagrams).
www.eaton.com 13
To Next Page
Loading...
Need help?
General