Eaton EDR 3000 - The System OK (Operational) LED

EDR-3000 IM02602003E
The »System OK (Operational) « LED
This LED flashes green while the device is booting. After booting is complete, the LED for System OK (Operational)
lights up in green signaling that the protection (function) is » activated« . If, however, in spite of successful booting, or
after the third unsuccessful reboot caused by the self supervision module, the Operational LED ( System OK) flashes in
red or is solidly illuminated in red, please contact your Eaton Corporation Customer Service Representative (also see
the Self Supervision section).
The Operational LED ( System OK) cannot be configured.
www.eaton.com 128