EDR-3000 IM02602003E
Acknowledgment Options
LEDs can be acknowledged by:
•The push-button »C« at the operating panel;
•A signal from the »LED Reset list« (e.g. digital inputs or communication signals) (If »
Latched = active«
);
•The »Ex Acknowledge« module - all LEDs can be acknowledged at once, if the signal for external acknowledgment
becomes true (e.g.: the state of a digital input); and
•Communication (Comm) - all LEDs can be acknowledged at once.
www.eaton.com 126
To Next Page
Loading...
