EDR-3000 IM02602003E
Read Out of Waveform Records
Within the »Operation/Waveform rec« menu, the User can:
•Detect the accumulated waveform records.
Within the »Operation/Recorders/Man Trigger« menu, the User can trigger the
waveform recorder manually.
To Read Out the Waveform Recorder with PowerPort-E
If PowerPort-E is not running, please start the application.
If the device data have not been loaded, click »Receive Data From The Device« in the »Device« menu.
Double click the »Operation« icon in the navigation tree.
Double click the »Recorders« icon in the navigation tree.
Double click the »Waveform rec« icon.
In the window, the waveform records are shown in tabular form.
A pop-up will appear by double clicking on a waveform record. Choose a folder where the waveform record is to be
saved.
The User can analyze the waveform records by means of the optionally available Quality Manager by clicking on
»Yes« when asked “Shall the received waveform record be opened by the Quality Manager?"
www.eaton.com 215
To Next Page
Loading...
