Eaton EDR 3000 - Page 243

EDR-3000 IM02602003E
Read Out the Event Recorder
Call up the » main menu«.
Call up the sub-menu »Operation/Recorders/Event rec« .
Select an event.
To Read Out the Event Recorder via PowerPort-E
If PowerPort-E is not running, please start the application.
If the device data have not been loaded, click »Receive Data From The Device« in the »Device menu.
Double click the »Operation« icon in the navigation tree.
Double click the »Event Rec« icon within the »Operation/Recorders« menu.
In the window, the events are shown in tabular form.
To have the event recorder updated in a cyclic manner, select »Automatic Up-
Date« in the » View « menu .
PowerPort-E is able to record more events than the device itself, if the window
of the event recorder is opened and »Automatic Up-Date« is set to active.
www.eaton.com 231