Eaton EDR 3000 - Page 262

EDR-3000 IM02602003E
Device Planning Parameters of the SNTP
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Use [Device Planning]
Direct Commands of the SNTP
Parameter Description Setting range Default Menu path
Res Counter Reset all Counters. Inactive,
Active
Inactive [Operation
/Reset]
Global Protection Parameters of the SNTP
Parameter Description Setting range Default Menu path
Server1 Server 1 Inactive,
Active
Inactive [Device Para
/Time
/TimeSync
/SNTP]
IP Byte1 IP1.IP2.IP3.IP4 0 - 255 0 [Device Para
/Time
/TimeSync
/SNTP]
IP Byte2 IP1.IP2.IP3.IP4 0 - 255 0 [Device Para
/Time
/TimeSync
/SNTP]
IP Byte3 IP1.IP2.IP3.IP4 0 - 255 0 [Device Para
/Time
/TimeSync
/SNTP]
www.eaton.com 250