EDR-3000 IM02602003E
Signal Description
Maint Mode Active Signal: Arc Flash Reduction Maintenance Active
Maint Mode Inactive Signal: Arc Flash Reduction Maintenance Inactive
MaintMode Manually Signal: Arc Flash Reduction Maintenance Manual Mode
Maint Mode Comm Signal: Arc Flash Reduction Maintenance Comm Mode
Maint Mode DI Signal: Arc Flash Reduction Maintenance Digital Input Mode
Param to be saved Number of parameters to be saved. 0 means that all parameter changes are overtaken.
Ack LED Signal: LEDs Acknowledgment
Ack RO Signal: Acknowledgment of the Relay Outputs
Ack Counter Signal: Reset of all Counters
Ack Comm Signal: Acknowledge Communication
Ack TripCmd Signal: Reset Trip Command
Ack LED-HMI Signal: LEDs Acknowledgment :HMI
Ack RO-HMI Signal: Acknowledgment of the Relay Outputs :HMI
Ack Counter-HMI Signal: Reset of all Counters :HMI
Ack Comm-HMI Signal: Acknowledge Communication :HMI
Ack TripCmd-HMI Signal: Reset Trip Command :HMI
Ack LED-Comm Signal: LEDs Acknowledgment :Communication
Ack RO-Comm Signal: Acknowledgment of the Relay Outputs :Communication
Ack Counter-Comm Signal: Reset of all Counters :Communication
Ack Comm-Comm Signal: Acknowledge Communication :Communication
Ack TripCmd-Comm Signal: Reset Trip Command :Communication
www.eaton.com 266
To Next Page
Loading...
