Eaton EDR 3000 - Page 292

EDR-3000 IM02602003E
Direct Commands of the IEC 61850
Parameter Description Setting range Default Menu path
ResetStatistic Reset of all IEC61850 diagnostic counters Inactive,
Active
Inactive [Operation
/Reset]
Global Protection Parameters of the IEC 61850
Parameter Description Setting range Default Menu path
Function Permanent activation or deactivation of module/element. Inactive,
Active
Inactive [Device Para
/IEC61850]
VirtualOutput1 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput2 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput3 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput4 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput5 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput6 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
www.eaton.com 280