EDR-3000 IM02602003E
If the device was not active within the parameter setting mode for a longer time (can be set
between 20 – 3600 seconds) it changes into »Read Only-Lv0« mode automatically. This
parameter (t-max-Edit) can be modified within menu [Device Para\HMI].
Access Areas (Password Level):
You have to ensure, that the access authorizations are protected by secure
passwords. These passwords have to be kept as a secret and to be known only
by the authorized persons.
A lock symbol indicates in the upper right corner of the display if there are any
access authorizations active at the moment . That means, within the mode
"Read Only Lv0" a closed (locked) lock symbol will be shown in the upper right
corner of the display. As soon as there are any access authorizations active
(above the "Read Only-Lv0" level), the upper right corner of the display will
show an unlocked (open) lock symbol.
www.eaton.com 306
Supervisor-Lv3
Prot-Lv2
Prot-Lv1
Control-Lv1
Control-Lv2
To Next Page
Loading...
