Eaton EDR 3000 - Page 391

EDR-3000 IM02602003E
Switchgear/Breaker Input States
Name Description Assignment via
CinBkr-52a-I Module Input State: Feed-back signal of the Bkr (52a) [Control
/Bkr
/Pos Indicatrs Wirng]
CinBkr-52b-I Module Input State: Feed-back signal of the Bkr. (52b) [Control
/Bkr
/Pos Indicatrs Wirng]
Ready-I Module Input State: Breaker Ready [Control
/Bkr
/Pos Indicatrs Wirng]
Sys-in-Sync-I State of the module input: This signals has to become true within
the synchronization time. If not, switching is unsuccessful.
[Control
/Bkr
/Synchron Switchg]
Ack TripCmd-I State of the module input: Acknowledgment Signal (only for
automatic acknowledgment). Module input signal
[Control
/Bkr
/Trip Manager]
Interl CLOSE1-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl CLOSE2-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl CLOSE3-I State of the module input: Interlocking of the CLOSE command [Control
/Bkr
/Interlockings]
Interl OPEN1-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
Interl OPEN2-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
Interl OPEN3-I State of the module input: Interlocking of the OPEN command [Control
/Bkr
/Interlockings]
www.eaton.com 379