Eaton EDR 3000 - Page 577

EDR-3000 IM02602003E
Name Description
Logic.LE75.Gate Out Signal: Output of the logic gate
Logic.LE75.Timer Out Signal: Timer Output
Logic.LE75.Out Signal: Latched Output (Q)
Logic.LE75.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE76.Gate Out Signal: Output of the logic gate
Logic.LE76.Timer Out Signal: Timer Output
Logic.LE76.Out Signal: Latched Output (Q)
Logic.LE76.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE77.Gate Out Signal: Output of the logic gate
Logic.LE77.Timer Out Signal: Timer Output
Logic.LE77.Out Signal: Latched Output (Q)
Logic.LE77.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE78.Gate Out Signal: Output of the logic gate
Logic.LE78.Timer Out Signal: Timer Output
Logic.LE78.Out Signal: Latched Output (Q)
Logic.LE78.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE79.Gate Out Signal: Output of the logic gate
Logic.LE79.Timer Out Signal: Timer Output
Logic.LE79.Out Signal: Latched Output (Q)
Logic.LE79.Out inverted Signal: Negated Latched Output (Q NOT)
Logic.LE80.Gate Out Signal: Output of the logic gate
Logic.LE80.Timer Out Signal: Timer Output
Logic.LE80.Out Signal: Latched Output (Q)
Logic.LE80.Out inverted Signal: Negated Latched Output (Q NOT)
These trips will start the BF module if »All current« functions have been selected as the trigger event.
Name Description
-.- No assignment
50P[1].TripCmd Signal: Trip Command
50P[2].TripCmd Signal: Trip Command
50P[3].TripCmd Signal: Trip Command
51P[1].TripCmd Signal: Trip Command
51P[2].TripCmd Signal: Trip Command
51P[3].TripCmd Signal: Trip Command
www.eaton.com 565