Eaton EDR 3000 - Page 584

EDR-3000 IM02602003E
Device Planning Parameters of the Current Transformer Supervision
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Do not use [Device Planning]
Global Protection Parameter of the Current Transformer Supervision
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Supervision
/CTS]
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Supervision
/CTS]
www.eaton.com 572