2-8
Safety and Symbols
Indicates “ON” condition for part of the equipment
Identifies a control that returns the device to its
initial state
Consult instructions for use.
Consult instructions for use.
Caution
Intertek ETL
Class II
Video equipment output control
Connector: Serial COM output
Keep contents dry
Fragile. Handle with care
This end up
Keep away from direct sunlight.
Catalogue number
Quantity
Serial Number
Table 2-2 Symbols on Product Labels (Continued)
Symbol Description
Use by
Lot Number
Non-sterile
Single Use
Authorized representative in the European
Community
Magnetic resonance unsafe
CE conformity marking per European Council
Directive 93/42/EEC of 14 June 1993 concerning
medical devices.
No serviceable parts inside
Type BF applied part
Alarm, general (Pump-Unit)
Battery Status
AC Mains Status
Equipotentiality
Continuous, noninvasive arterial blood pressure
Indoor use only
Analog output
ClearSight Finger Cuff Size (S=Small, M=Medium,
L=Large)
Warehouse Storage Temperature Limitations
(X = lower limit, Y = upper limit)
Table 2-2 Symbols on Product Labels (Continued)
Symbol Description
To Next Page
Loading...
