STP-iX457/iXU457 Series Turbomolecular Pump
MT-86E-001-F
Page 26
INSTALLATION
3
When installing the STP pump to the vacuum equipment in upside-down position, the STP-
iX457/iXU457 series can be loft with the eyebolts (M8) attached to the screw holes for securing the
base. (see Figure 18)
A crane and eyebolts due to lifting operations should withstand the load of five times or more the
weight of the STP pump, and rope should be seven time or more. Use an eyebolt which confirms to
ISO03266. When lifting the pump, use 2 or more ropes.
Figure 18 - STP pump with eyebolts
Screw holes for
the base
To Next Page
Loading...
