emesent HOVERMAP-ZOE - Zoe Flight Limitations; Center of Gravity Limits; Reference Datum

Hovermap-Zoe user manual
Release date: 01 Nov 2021
Revision: 1.0
95
•
•
•
4.5.3.2 Zoe flight limitations
If Zoe loses GPS signal and exceeds the distance limits set in the ArduPilot software, it will fly back
within the set range once it receives a GPS signal again.
You can set Zoe flight limitations in the Hovermap App.
4.5.4 Center of gravity limits
4.5.4.1 Reference datum
The reference datum for determining the center of gravity limits for Zoe is determined as follows:
The reference datum is located at the point where the three cross-sectional planes intersect each
other.
The XY plane is located on the bottom of the centerpiece of the Zoe. The bottom of the 3D
carbon part supports the landing gear bracket/damping.
Due to the symmetry of the Zoe, the vertical reference is the cross-section line between the XZ
plane and the YZ plane.
Warning
Exceeding the center of gravity limitations reduces the maneuverability and
stability of the Zoe.
