14 https://www.emesent.io/portal/report-an-issue/
15 https://www.emesent.io/portal/report-an-issue/
16 https://www.emesent.io/portal/report-an-issue/
17 https://www.emesent.io/portal/report-an-issue/
18 https://www.emesent.io/portal/report-an-issue/
Release date: 01 Nov 2021
Revision: 1.0
1.
2.
3.
4.
5.
1.
2.
Landing gear/damping
Check the landing gear for any damage, cracks or, deformities. If there is any crack or dent larger
than 2 mm, please contact Customer Success
14
.
If there is excessive deformation in the landing gear, or excessive play on the landing gear leg
ends, please contact Customer Success
15
.
Check all fixtures on the landing gear/damping bracket.
Check that all fasteners are tightened. There is no need to overtighten them.
Check that the wire dampers are still in their correct position.
5.2.2.3 Arm replacement
If you detect any damage or crack during an airframe check, please contact Customer Success
16
to
replace the arm.
5.2.2.4 Airframe repair/replacement
If there is any damage or deformation in the center frame of the landing gear/damping, please contact
Customer Success
17
.
5.2.2.5 Battery connector insert check/replacement
The battery insert connectors have a gold coating. Corrosion may form on the connector, which can
restrict the power current flow from the battery to the power distribution board. This can lead to
shorter flight times.
Remove small amounts of corrosion with 800 grit sandpaper.
Contact Customer Success
18
to arrange replacement of the positive and negative battery
connectors every 160 hours or 350 flights.
5.2.3 Propeller maintenance
It is important to keep the propellers in optimal condition to keep Zoe functioning safely.
To Next Page
Loading...