Release date: 01 Nov 2021
Revision: 1.0
4.6.1.2 Critical Battery Auto-landing failsafe
The Critical Battery Auto-landing failsafe is an advanced, fully autonomous function (no pilot input
required) that will land the drone in a controlled manner in its current location.
This function is executed when battery capacity falls below 15%. The app will sound the critical alert at
15% to allow pilots final position adjustments before the auto-landing begins. This exists to allow you to
ensure a safe and controlled landing before Zoe takes control authority and executes its own
emergency landing at 10% battery capacity.
The system will say “landing” as an audible warning, and will show Landing in the Hovermap status bar.
4.6.1.3 Remote Controller Communications Loss RTH failsafe
The Remote Controller Communications Loss RTH failsafe will automatically bring the drone back to the
home position if the system senses that the link between the drone and the remote control has been
lost, and no waypoint mission is in progress.
•
•
Modes of operation
Pilot Assist mode
Autonomous Waypoint mode
Warning
When initiated, the Critical Battery Auto-landing failsafe will set the drone down in
its current location. The pilot has no control once this failsafe is initiated. You
must maneuver the drone into a safe, retrievable location before the battery level
reaches 15%.
•
Modes of operation
Pilot Assist mode
To Next Page
Loading...