emesent HOVERMAP-ZOE - Web UI Functions

Hovermap-Zoe user manual
Release date: 01 Nov 2021
Revision: 1.0
22
•
•
•
•
•
•
1.
2.
3.
4.
5.
3.2 Web UI
3.2.1 Overview
Hovermap provides a user interface, known as the Web UI. You can use the Web UI to:
Remotely start and stop a scan. This is useful when physical access to the unit is inconvenient
(for instance, if Hovermap is mounted on a backpack, or on a vehicle bonnet while driving).
Set the scan name.
Update firmware.
Set the system time.
Find out how much storage space is available on the internal solid-state drive.
Download files.
3.2.2 Access the Web UI
To access the Web UI:
Connect Hovermap to a power source (12 VDC to 54 VDC).
Press the power button on the back of the Hovermap to power on the system.
On your mobile device, open the Wi-Fi settings and connect to Hovermap’s Wi-Fi. Hovermap
creates a Wi-Fi network with the name of the serial number of the unit. For example, for
Hovermap HVM0068 the network name will be HVM100_0068.
Enter the network password: hovermap
Once connected, open an internet browser window and type hover.map into the address bar.
•
•
Tip
If the Web UI doesn’t load, type 10.9.0.1.
Save this page as a shortcut on the home screen for easy access in the
future.
