Endress+Hauser Cerabar M PMC51 - Page 125

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 125
Calibration Range / Output
Low range value (LRV):
Upper range value (URV):
__________
__________
[Pressure
engineering unit]
[Pressure
engineering unit]
Display
1st Value Display
1)
2nd Value Display
1)
 Main Value 




None (Default)
Main Value [%]
Pressure
Current [mA] (HART only)
Temperature
1) Depending on sensor and communication version
Damping
Damping: ___________ sec (Default 2 sec)
Lowest calibratable span (preset at factory) →  13