Cerabar M PMC51, PMP51, PMP55
60 Endress+Hauser
E
42 (1.65)
64 (2.52)
61 (2.4)
56,5 (2.22)
52 (2.05)
13 (0.51)
H
97 (3.82)
A0027845
F
42 (1.65)
52 (2.05)
76.7 (3.02)
91 (3.58)
83.5 (3.29)
H
97 (3.82)
A0027846
G
66 (2.6)
50 (1.97)
52 (2.05)
38 (1.5)
12,3 (0.48)
H
85 (3.35)
A0027847
H
42 (1.65)
75 (2.95)
68 (2.68)
84 (3.31)
52 (2.05)
12,3 (0.48)
H
85 (3.35)
A0027848
Engineering unit mm (in)
Item Designation Nominal pressure Material
1)
Weight Approval
2)
Option
3)
kg (lb)
E Tri-Clamp ISO 2852, DN40-DN51 (2") PN 40
AISI 316L
(1.4435)
0.65 (1.44) EHEDG, 3A with seal FDA, CRN, ASME-BPE TDJ
4)
F Tri-Clamp ISO 2852, DN76.1 (3") PN 40 0.9 (1.98) EHEDG, 3A with seal FDA, CRN, ASME-BPE TFJ
G Varivent F pipe, DN25-32 PN 40 0.46 (1) EHEDG, 3A with seal FDA, ASME-BPE TQJ
H Varivent N pipe, DN40–162 PN 40 1 (2.21) EHEDG, 3A with seal FDA, ASME-BPE TRJ
1) Delta ferrite content < 1 %. The roughness of the surface in contact with the medium is R
a
< 0.76 µm (30 µin).
2) CSA approval: Product Configurator, order code for "Approval"
3) Product Configurator, order code for "Process connection"
4) Endress+Hauser supplies these slotted-nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material
number 1.4307).
To Next Page
Loading...
