Endress+Hauser Cerabar M PMC51 - Page 61

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 61
I
16 (0.63)
42 (1.65)
52 (2.05)
61 (2.4)
84 (3.31)
105 (4.13)
65 (2.56)
H
80 (3.15)
A0027849
J
12,5 (0.49)
42 (1.65)
82 (3.23)
52 (2.05)
ø61 (2.4)
100 (3.94)
69 (2.72)
H
85 (3.35)
A0033047
K
38 (1.5)
52 (2.05)
50 (1.97)
70 (2.76)
90 (3.54)
17 (0.67)
51 (2)
H
80 (3.15)
A0027851
Engineering unit mm (in)
Item Designation Nominal pressure Material
1)
Weight Approval
2)
Option
3)
kg (lb)
I DRD, DN50 (65 mm) PN 25
AISI 316L
(1.4435)
0.9 (1.98) FDA TIJ
4)
J APV Inline, DN50 PN 40 0.52 (1.15) 3A with seal FDA, CRN, ASME-BPE TMJ
K NEUMO BioControl, DN50 PN 16 1.34 (2.6) 3A with seal FDA, ASME-BPE S4J
5)
1) Delta ferrite content < 1 %. The roughness of the surface in contact with the medium is R
a
< 0.76 µm (30 µin).
2) CSA approval: Product Configurator, order code for "Approval"
3) Product Configurator, order code for "Process connection"
4) Endress+Hauser supplies these slotted-nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material
number 1.4307).
5) 4 screws DIN912 M8 x 45 are enclosed (material A4-80)