Endress+Hauser Cerabar M PMC51 - Page 62

Cerabar M PMC51, PMP51, PMP55
62 Endress+Hauser
L
38 (1.5)
55 (2.17)
4 (0.16)
52 (2.05)
61 (2.4)
H
97 (3.82)
A0027852
M
38 (1.5)
65 (2.56)
4 (0.16)
52 (2.05)
61 (2.4)
H
97 (3.82)
A0027853
Engineering unit mm (in)
Item Designation Nominal pressure Material
1)
Weight Approval
2)
Option
3)
kg (lb)
L SMS 1 ½" PN 25
AISI 316L
(1.4435)
0.65 (1.43) 3A, ASME-BPE TXJ
4)
M SMS 2" PN 25 0.65 (1.43) 3A, ASME-BPE T7J
4)
1) Delta ferrite content < 1 %. The roughness of the surface in contact with the medium is R
a
< 0.76 µm (30 µin).
2) CSA approval: Product Configurator, order code for "Approval"
3) Product Configurator, order code for "Process connection"
4) Endress+Hauser supplies the slotted-nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material
number 1.4307).
Height H
Item Process connection F31 housing F15 housing
A DIN 11851 DN40 48 mm (1.89 in) 54 mm (2.13 in)
B DIN 11851 DN50 70 mm (2.76 in) 77 mm (3.03 in)
C DIN 11864 DN40, pipe DIN 11866-A 48 mm (1.89 in) 54 mm (2.13 in)
D DIN 11864 DN50, pipe DIN 11866-A 70 mm (2.76 in) 77 mm (3.03 in)
E Tri-Clamp ISO 2852, DN40-DN51 (2") 70 mm (2.76 in) 77 mm (3.03 in)
F Tri-Clamp ISO 2852, DN76.1 (3") 70 mm (2.76 in) 77 mm (3.03 in)
G Varivent F pipe, DN25-32 48 mm (1.89 in) 54 mm (2.13 in)
H Varivent N pipe, DN40–162 70 mm (2.76 in) 77 mm (3.03 in)
I DRD, DN50 (65 mm) 70 mm (2.76 in) 77 mm (3.03 in)
J APV Inline, DN50 70 mm (2.76 in) 77 mm (3.03 in)
K NEUMO BioControl, DN50 48 mm (1.89 in) 54 mm (2.13 in)
L SMS 1 ½" 48 mm (1.89 in) 54 mm (2.13 in)
M SMS 2" 48 mm (1.89 in) 54 mm (2.13 in)