Endress+Hauser HART Proline t-mass I 300 - Page 109

Proline t-mass I 300 HART Commissioning
Endress+Hauser 109
Connection state
→  110
Received signal strength
→  110
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
WLAN – Switch WLAN on and off. • Disable
• Enable
–
WLAN mode – Select WLAN mode. • WLAN access
point
• WLAN Client
–
SSID name The client is activated. Enter the user-defined SSID
name (max. 32 characters).
– –
Network security – Select the security type of the
WLAN network.
• Unsecured
• WPA2-PSK
• EAP-PEAP with
MSCHAPv2
*
• EAP-PEAP
MSCHAPv2 no
server authentic.
*
• EAP-TLS
*
–
Security identification – Select security settings and
download these settings via
menu Data management >
Security > WLAN.
• Trusted issuer
certificate
• Device certificate
• Device private key
–
User name – Enter user name. – –
WLAN password – Enter WLAN password. – –
WLAN IP address – Enter IP address of the WLAN
interface of the device.
4 octet: 0 to 255 (in
the particular octet)
–
WLAN MAC address – Enter MAC address of the
WLAN interface of the device.
Unique 12-digit
character string
comprising letters
and numbers
Each measuring
device is given an
individual address.
WLAN passphrase The WPA2-PSK option is
selected in the Security type
parameter.
Enter the network key (8 to 32
characters).

The network key
supplied with the device
should be changed
during commissioning
for security reasons.
8 to 32-digit
character string
comprising numbers,
letters and special
characters (without
spaces)
Serial number of the
measuring device
(e.g. L100A802000)
Assign SSID name – Select which name will be used
for SSID: device tag or user-
defined name.
• Device tag
• User-defined
–
SSID name • The User-defined option is
selected in the Assign SSID
name parameter.
• The WLAN access point
option is selected in the
WLAN mode parameter.
Enter the user-defined SSID
name (max. 32 characters).

The user-defined SSID
name may only be
assigned once. If the SSID
name is assigned more
than once, the devices
can interfere with one
another.
Max. 32-digit
character string
comprising numbers,
letters and special
characters
–