Endress+Hauser HART Proline t-mass I 300 - Access to the Operating Menu Via the Local Display; Operational Display

Operation options Proline t-mass I 300 HART
48 Endress+Hauser
7.3 Access to the operating menu via the local display
7.3.1 Operational display
X X X X X X XX X
4
2
1
3
5
kg/h
1120.50
F
A0029348
1 Operational display
2 Device tag
3 Status area
4 Display area for measured values (4-line)
5 Operating elements →  53
Status area
The following symbols appear in the status area of the operational display at the top right:
• Status signals→  139
• F: Failure
• C: Function check
• S: Out of specification
• M: Maintenance required
• Diagnostic behavior→  140
• : Alarm
• : Warning
• : Locking (the device is locked via the hardware )
• : Communication (communication via remote operation is active)
Display area
In the display area, each measured value is prefaced by certain symbol types for further
description:
Measured variable Measurement channel
number
Diagnostic behavior
↓ ↓ ↓
Example
Appears only if a diagnostics
event is present for this
measured variable.
Measured variables
Symbol Meaning
Mass flow
• Volume flow
• Corrected volume flow
• FAD volume flow