Endress+Hauser HART Proline t-mass I 300 - Opening the Context Menu

Operation options Proline t-mass I 300 HART
54 Endress+Hauser
Operating key(s) Meaning
+
Escape key combination (press keys simultaneously)
In a menu, submenu
• Pressing the key briefly:
• Exits the current menu level and takes you to the next higher level.
• If help text is open, closes the help text of the parameter.
• Pressing the key for 2 s returns you to the operational display ("home position").
With a Wizard
Exits the wizard and takes you to the next higher level.
With a text and numeric editor
Close the editing view without accepting the changes.
+
Minus/Enter key combination (press the keys simultaneously)
• If the keypad lock is active:
Press the key for 3 s: deactivate the keypad lock.
• If the keypad lock is not active:
Press the key for 3 s: the context menu opens along with the option for activating the
keypad lock.
7.3.5 Opening the context menu
Using the context menu, the user can call up the following menus quickly and directly from
the operational display:
• Setup
• Data backup
• Simulation
Calling up and closing the context menu
The user is in the operational display.
1. Press the  and  keys for longer than 3 seconds.
 The context menu opens.
XXXXXXXXXX
l/h
Setup
Conf.backup
Simulation
Keylock on
A0034608-EN
2. Press  +  simultaneously.
 The context menu is closed and the operational display appears.
Calling up the menu via the context menu
1. Open the context menu.
2. Press  to navigate to the desired menu.
3. Press  to confirm the selection.
 The selected menu opens.