Endress+Hauser HART Proline t-mass I 300 - Output Values

Proline t-mass I 300 HART Operation
Endress+Hauser 129
Navigation
"Diagnostics" menu → Measured values → Input values → Status input 1 to n
‣
Status input 1 to n
Value status input
→  129
Parameter overview with brief description
Parameter Description User interface
Value status input Shows the current input signal level. • High
• Low
10.4.5 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
‣
Current output 1 to n
→  129
‣
Pulse/frequency/switch output
1 to n
→  130
‣
Relay output 1 to n
→  130
Output values of current output
The Value current output submenu contains all the parameters needed to display the
current measured values for every current output.
Navigation
"Diagnostics" menu → Measured values → Output values → Value current output 1 to n
‣
Current output 1 to n
Output current 1 to n
→  130
Measured current 1 to n
→  130